View AZ697-1C-18D_4958403.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AZ697
10 AMP MINIATURE POWER RELAY
FEATURES * * * * * * * * Dielectric strength 5000 Vrms Low cost Epoxy sealed version available 10 Amp switching -- single pole contacts UL TV-5 Isolation spacing greater than 8mm UL Class B insulation system, Class F available UL, CUR file E44211; TUV file R50129288
CONTACTS
Arrangement Ratings SPST (1 Form A) SPDT (1 Form C) Resistive load: Max. switched power: 300 W or 2770 VA Max. switched current: 10 A Max. switched voltage: 150* VDC or 380 VAC
*Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory.
GENERAL DATA
Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 107 1 x 105 at 10 A 240 VAC Res. 8 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression)
Rated Load UL, CUR TV-5 at 120 VAC [1][2][3] 10 A at 277 VAC, General Use [1] 10 A 30 VDC, Resistive [1] 1/3 HP at 250 VAC [1] 1/4 HP at 125 VAC N.O. [1] 10 A at 277 VAC, General Use, 100k cycles [2][3] 10 A at 30 VDC, Resistive, 100k cycles [2][3] 1/3 HP at 250 VAC, 100k cycles [2][3] 1/4 HP at 125 VAC, 100k cycles [2][3] 10 A at 250 VAC, 30 VDC Resistive 100k cycles [1][2] 10 A at 250 VAC, 30 VDC Resistive 50k cycles [3] Silver cadmium oxide [1], silver nickel [2], silver tin oxide [3], Gold plating available < 50 milliohms initially (24 V, 1 A voltage drop method)
Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating Storage 1000 megohms min. at 20C, 500 VDC 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40C (-40F) to 90C (194F) Class B -40C (-40F) to 110C (230F) Class F -40C (-40F) to 130C (266F) Class B -40C (-40F) to 155C (311F) Class F 0.062" DA at 10-55 Hz 10 g P.B.T. polyester Tinned copper alloy, P. C. 270C (518F) 5 seconds 80C (176F) 30 seconds 18 grams
TUV
Vibration Shock Enclosure
Material Resistance
Terminals Max. Solder Temp.
COIL
Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 257 mW 1.9 W at 20C (68F) ambient (Class B) 2.5 W at 20C (68F) ambient (Class F) 34 C (61F) at nominal voltage Max. 130C (266F) Class B Max. 155 C (311 F) Class F
Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight
NOTES
1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Specifications subject to change without notice.
4/9/09W
AZ697
RELAY ORDERING DATA
COIL SPECIFICATIONS
Nominal Coil VDC 3 5 6 9 12 18 24 48 60 110 Must Operate VDC 2.1 3.5 4.2 6.3 8.4 12.6 16.8 33.6 42.0 79.3 Max. Continuous VDC 5.7 9.4 11.4 17.4 22.8 27.9 45.7 89.0 115.3 170.5 Coil Resistance 17 47 68 160 275 650 1100 4170 7000 22900 10% 10% 10% 10% 10% 10% 15% 15% 15% 15%
ORDER NUMBER*
Form A (SPST) AZ697-1A-3D AZ697-1A-5D AZ697-1A-6D AZ697-1A-9D AZ697-1A-12D AZ697-1A-18D AZ697-1A-24D AZ697-1A-48D AZ697-1A-60D AZ697-1A-110D Form C (SPDT) AZ697-1C-3D AZ697-1C-5D AZ697-1C-6D AZ697-1C-9D AZ697-1C-12D AZ697-1C-18D AZ697-1C-24D AZ697-1C-48D AZ697-1C-60D AZ697-1C-110D
*For silver nickel contacts change "-1A" or "-1C" to "-1AB" or "-1CB". For silver tin oxide contacts change "-1A" or "-1C" to "-1AE" or "-1CE". For epoxy seal change "D" to "DE". For gold plating change "D" or "DE" to "DA" or "DEA". For Class F insulation add suffix "F" to part number.
HARDWARE ORDERING DATA
DESCRIPTION
Socket
ORDER NUMBER
ST482-U1
DESCRIPTION
Retainer
ORDER NUMBER
ST482-2
MECHANICAL DATA
Form A and C
1.14 (29) .160 .015 (4.2 .4) .51 (13)
PC BOARD LAYOUT
Viewed toward terminals
.138 .138 .649 (3.5) (3.5) (16.5) .015 (0.38)
1.02 (25.9)
.295 (7.5) .08 (2.1) .05 DIA. (1.3) (Form C only) (4 places Form A) (5 places Form C)
Terminal No. Dimensions Tol.: 0.005 (0.13) 1,2,3,5 0.018 (0.457) x 0.038 (0.965) 4 0.011 (0.279) x 0.038 (0.965)
WIRING DIAGRAM
ST482-U1
HARDWARE
.500 (12.7) .177 MAX. (4.5)
.354 (9.0)
Form A
1 5 4 3 1 5
Form C
2 4 3
1.22 (30.9) .414 (10.5) .295 (7.5)
1.28 (32.5) .366 (9.3) .125 DIA (3.2)
1.217 (30.9)
.158 (4.0)
Viewed toward terminals
.276 (7.0) .792 (20.1) .059 DIA (1.5) .118 (3.0) 1.004 (26.5)
RETAINING CLIP
.138 (3.5)
ST482-2
Dimensions in inches with metric equivalents in parentheses. Tolerance: .010"
4/9/0 W

▲Up To Search▲

Price & Availability of AZ697-1C-18D

	To Download AZ697-1C-18D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .